Eschmann Eschmann

E50 Electrosurgery System When performance, precision and versatility really matter

Trusted performance and quality have always been values associated with Eschmann products and the new E50 is no exception.

Ease of use is at the heart of our innovations; we strive to ensure our products are intuitive to use, allowing the clinician to concentrate on the job in hand. The touch-screen technology of the E50 electrosurgery system takes the ease of use to a whole new level, minimising training requirements and facilitating fast set-up.

The E50 features leading edge technology in the form of Vessel Sealing and Argon Coagulation. Bipolar Vessel Sealing allows the sealing of vessels and tissue bundles up to 7mm in diameter. Argon Beam is a monopolar technology using high frequency electrical current to deliver ionized argon gas to create a wide area of coagulation with a limited penetration depth of 3mm.

The E50 delivers exceptional versatility through its 24 research based cutting and coagulation modes, plus optional Vessel Sealing and Argon Beam modes never before available in such an intuitive package.

Safety Features

Protection against electric shock:  
Class I
Grade CF
Low-frequency leakage currents according to IEC 601-1-1
High-frequency leakage currents according to IEC 601-2-2
Generator operation frequency 357 kHz
Defibrillation impulse resistance according to EN 60601-1
NEM System neutral electrode monitor
AUTOTEST self-test of generator after switching the power on, service codes display
OVERLOAD generator overload protection

Monopolar Cut

Precise 80W
Pure cut 350W
Precise Cut 80W
Blend 8 Levels
Cut with drying 150W
Specialist cut 350W
Argon cut 350W
Papillotomy/Polypectomy 9 levels

Monopolar Coagulation

Soft coagulation 200W
Forced coagulation 200W
Forced coagulation II
Spray coagulation 80W
Argon coagulation 80W
Argon pulse coagulation 80W

Bipolar Cutting

Bipolar cutting
(4 different levels of haemostasis)
Bipolar specialist cut 350W

Bipolar Coagulation

Bipolar coagulation 120W
AutoStart / AutoStop automatic start and stop of bipolar coag.

Argon Beam

Gas type pure argon 5.0 (99.999%) or 4.8 (99.998%)
Inlet gas pressure 0.25-0.4MPa
Gas outflow 0.1-9.9 l/min, regulated 0.1 l/min in whole range
Pressure gauge reducer (0.4MPa) on argon cylinder

Vessel Sealing

Vessel sealing system 250W
AutoStop automatic stop of sealing process after achieving the optimal effect
Effect regulation 8 levels of intensity regulation

Weight & Dimensions

Length 420mm
Width 380mm
Height 160mm
Weight 12kg

Power Supply

Supply voltage 230V 50/60Hz

Other Features

PowerStart system Boosts the beginning of cutting process
Power regulation system Automatic power regulation depends on needs
PP endoscopic programme Includes endo detect
Programme memory 104 different memory locations
Remote programme selection by footswitch
2 monopolar, 2 bipolar



Modular system upgrades allow users to meet future demands which may require the use of enhanced cutting and coagulation techniques by accessing integral argon beam and specialist vessel sealing modules.

Vessel Sealing Module

Thermal sealing using vessel sealing forceps allows quick and effective sealing of large vessels and tissue bundles up to 7mm in diameter. Vessel sealing eliminates the need for traditional staples and sutures, by creating a permanent seal which can reduce both surgery and recovery times.

Argon Beam Module

Argon plasma coagulation and argon enhanced cutting ensures fast, effective devitalisation of tissues which causes less blood loss and tissue damage.  

  • Wide area of coagulation reduced procedure time
  • No contact between the applicator and the tissue means no adhesion
  • Minimal risk of perforation with penetration depth limited to 3mm
  • Minimal carbonisation and no vaporisation
  • Low level of smoke improves visibility in the operating area

Related products

E30 Electrosurgery Unit

More Info

E20 Electrosurgery Unit

More Info

E10 Electrosurgery unit

More Info

Upcoming exhibitions

If we can offer you more detailed information over the telephone than you have been able to find on our website why not request a call back?

Simply complete your details in the form shown and one of our experienced advisers will contact you as soon as they possibly can to help you with your questions.

Copyright © 2018 Eschmann Equipment

The 'Eschmann' name and logo are trade marks of Eschmann Holdings Ltd.

'Eschmann Equipment' is a trading name of Eschmann Holdings Ltd.